Turquoise Geometry

Abstract geometric shapes in a vibrant turquoise and gold color palette, creating a dynamic and visually captivating 3D digital art composition.

from $4.50 /sq ft

Your wall
—
With our 6 in margin
—
Panels
—
Billable area
—

— Minimum 50 sq ft per wall. Minimum order $350.00 before tax and shipping.

Please enter whole numbers only. Round part inches up, so enter 2 for 1.5 or 1.75 inches.

Prices are for wallpaper only. Installation is not included. Shipping is worked out at checkout from your delivery address.

Description

Description

Width Trims to 33 in (83.8 cm)
Bolt Size 11′ Panel

Measuring

How to measure your wall

Measure the wall itself, in feet and inches, and round up to the next whole inch. Every drawing below shows only what you measure.

  • Your wall
  • The rectangle you measure, on walls that are not square
Enter your actual wall - we add the margin We add 6 inches to both the width and the height in our calculation, so there is paper to trim at every edge. Please do not add it yourself, or you will pay for the same margin twice. The drawings below do not show that margin - measure the wall as you see it here.
WidthHeight

1. A straight wall

  • Measure the width at the top and again at the bottom, and use the larger of the two. Do the same for the height at both ends — walls are rarely square.
  • Measure the whole area you want covered, corner to corner and skirting to ceiling.
  • Round up to the next whole inch. Enter 2 for 1½.
trimmed on siteWidest widthTallest height

2. A sloping ceiling or an angled wall

  • Measure the rectangle that contains the wall: its widest width and its tallest height. That is the dashed outline above.
  • The paper above the slope is cut away once the panels are hung.
  • Don't measure along the slope itself, and don't try to subtract the triangle.
door or windowWidth, straight across the openingHeight

3. A wall with a door or a window

  • Measure straight across the opening, as if it were not there.
  • We print over it, and you cut the opening out once the paper is up. That keeps the pattern lined up on both sides.
  • Subtracting the opening leaves you short of paper, and the design will not line up.
Wall AWall Bthe cornerWidth BWidth AHeightHeight

4. An L-shaped wall — two walls that meet at a corner

  • Measure wall A from its free end into the corner, then wall B from the corner to its free end. The arrow above shows it as one run that bends at the corner — because that is what the paper does.
  • Take the height at either end. Use the taller of the two if they differ.
  • Want one continuous design across both walls? Add the two widths together and enter the total as one width, with the tallest height. We print it as a single mural that runs unbroken around the corner.
  • Want a separate picture on each wall? Then they are two orders, not one — measure and order each wall on its own, as in 5 below.
  • Either way, put wall A's width in the order notes. The corner is the hardest place to hang a panel, and knowing where it falls lets us tell you what to expect before we print.
Wall 1Wall 2not joinedHeight 1Height 2Width 1Width 2

5. Two walls that are not joined

  • Walls facing each other, or in different rooms, are separate orders. Measure each one on its own.
  • Same size on both? Enter the size once and set the quantity to 2. Different sizes? Add each wall to the cart separately.
  • Don't add the widths together. That prints one continuous picture, and half of it would land on a wall it was never drawn for.
Widthlowest treadTallest heightHeight is taken at the tallest point — the lowest tread up to the ceiling

6. A stairwell wall

  • Stand at the bottom of the stairs. Measure from the lowest tread straight up to the ceiling — that is the tallest height, and it is the one we need.
  • Measure the width across the whole wall, from the bottom of the stairs to the top landing.
  • We print the full rectangle, shown dashed above. The stepped edge along the stairs is trimmed once the panels are hung.
  • Work with two people and a proper platform. This is the hardest wall to hang, and the one most worth sending us a photo of first.
Not sure about your wall? Send us your measurements and a photo and we will check them before you order.
Ask us
SKU: 5DTG092 Categories: , ,